HGM Series of Three-rings and Medium-speed Micro-powder Grinder
HGM Series of Three-rings and Medium-speed Micro-powder Grinder is widely used in making fine powder or ultra-fine powder, and the raw materials should be non-inflammable and non-explosive under the Moh’s hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc. The lifetime of spare parts is relied on the hardness of raw materials, and is lowered once the Moh’s hardness is up to 4-6 grades.
Features of HGM series Three-rings and Medium-speed Micro-powder Grinder:
Applications: 325-2500mesh fine powder grinding
Field of application: Agriculture, biology, construction materials, glass / ceramics, mining, mineralogy, metallurgy
Feed material: medium-hard, hard, brittle, tough
Size reduction principle: pressure
Material of grinding Ring and Rollers: manganese steel, Chromium - molybdenum Alloy
Dust Filter System: With Bag Dust Filter
Durability: depending on feed material
Working Principle of HGM series Three-rings and Medium-Speed Micro-powder Grinder:
The material in the Silo will fall down into the Feeding tube evenly through the Vibrating Feeder, and then fall onto the upper scattering plate, after that will scatter on the gap between the roller and ring. The material into the inner wall of the rollers will be reground, and then fall down onto the lower scattering plate. And the fine powder conforms to the standard will be discharged into the Dispersive Twin-pipe Cyclone Separator, and then be discharged. And the massiveness will enter the grinding wall to be reground. The air current with the dust will enter into the lower part of the Pulse Bag Dust Catcher, and then be discharged through the Rotational Discharging Device after filtering dust.
Product Advantages of HGM series Three-rings and Medium-speed Micro-powder Grinder:
High efficiency and lower consumption
Non-bearings and non-bolt in the grinding chamber
The fineness of final products can be 5μm
The advanced technology in domestic
Energy conservation
Long service life
Specification and Technical Parameter:
|
Mod model |
HGM60 |
HGM80 |
HGM100 |
|
Average Diameter(mm) |
600 |
800 |
1000 |
|
No.of Roller and Ring |
Roller(Pcs) |
15 |
21 |
27 |
|
Ring(Pcs) |
2 |
2 |
2 |
|
The maximal Feeding Size(mm) |
10 |
10 |
10 |
|
Size of Finished Product |
Micron |
5-47 |
5-47 |
5-47 |
|
Mesh |
3250--325 |
3250--325 |
3250--325 |
|
Capacity(kg/h) |
350-2500 |
600-4000 |
900-6000 |
|
Motor Powder(kw) |
Main Mill |
37 |
55 |
90 |
|
Classifier |
11 |
18.5 |
30 |
|
Air Blower |
30 |
45 |
75 |
|
Vibrating Feeder |
0.06 |
0.06 |
0.15 |
|
Discharge Valve |
0.75 |
0.75 |
1.1 |
|
Dimension(L×W×H)(m) |
10×3×5.5 |
11.9×2.7×5.8 |
15.5×4.5×8.6 |
|
Weight of Main and Classifier(kg) |
5200 |
7000 |
9500 | |
